G
B
Infra-red Vibrating
Massage button
Control button
Massage rollers
Fill line
Figure 1
Do noT FiLL WATer oVer THe FiLL Line
Drain spout
PRODUCT FEATURES:
• Infra-red heat with vibrating massage
• Toe-touch activated controls
• Massaging rollers to stimulate the soles of your feet
• Acupressure surface - tiny nodules to stimulate your feet
• Soothing heat helps maintain warm water temperature
INSTRUCTIONS FOR USE:
. Ensure that the unit is unplugged before filling with water. Fill with warm water to the fill line located on
the inside of the foot spa (See Figure ). Do not fill higher than fill line.
NOTE: The heat option will help maintain the temperature of water placed inside this foot spa. It will not
heat cold water. For a warm water massage, fill the unit with warm water.
2. Plug the unit into a 220-240V socket.
3. With the touch of your toe, press the control button once to choose Bubbles/Heat. Press the button again
to choose Massage /Bubbles / Heat. Press the button a third time to turn off foot spa.
4. Sit down and place your feet in the foot spa.
. The infra-red vibrating massager is located on the splash guard - see figure . To use this feature, press the
infra-red button once to turn on. Place one foot at a time on the massager to enjoy the vibrating infra-red
heat. Press the infra-red button again to turn off. Note: This feature can be used with or without the bubble
massage activated.
6. If preferred, you can insert the rollers into the base of the foot spa (See Figure ). Then, enjoy a deep
penetrating massage by sliding feet back and forth over the massage rollers. Rollers are removable, pull
the rollers up and remove the entire roller holder.
7. To empty: First, unplug the unit. Tip the unit, allowing water to run out along the drain spouts.
IB-BB3EU-0810-01.qxd:Layout 1 14/9/10 12:43 Page 5
