The unit is “locked” - I can’t perform unit functions -
When this occurs, the unit maybe in “forced synchronization” mode. If the
radio antenna icon shows “waves” projecting from it, the unit is attempting to
synchronize with the atomic clock frequency. To override, simply press the
“ - ” button on the back of the unit. You will now be able to perform all other
functions.
SPECIFICATIONS
Range of temperature/humidity measurement:
Indoor temp :
+32 F to +122 F (0 C to + 50 C)
Remote sensor:
-4 F to +140 F (-20 C to +60 C)
Channel:
max. 3 remote sensors
Transmission:
max. 100 ft. (30 m) open area, RF434 MHz
Resolution:
0.1 degree for temperature
Clock: WWVB
Radio-controlled
Power source:
2 Alkaline AA batteries - remote sensor
2 Alkaline AA batteries - home receiver
FCC DISCLAIMER
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
FCC ID:
L5C0761TX-H (Transmitter)
Freq. 434 MHz
8
Name and Functions of Buttons:
Functions
If button is held down
SET
- -
Enter clock & calendar
setting
+/
1 step forward Alarm,
Fast advance
Select Alarm 1,2
-/
1 step backward
Fast backward
Select PST, MST,
Atomic time seek
CST, EST
ALARM
Read alarm time 5
Alarm time setting
sec at normal mode
CHANNEL
Select Channel 1,2,3,
Delete current channel
auto scroll
SNOOZE/
Backlight on 5 seconds,
BACKLIGHT
Trigger snooze alarm
9
Radio Antennae
(Forced Synchronization)
Time Zone
Snooze Button/
Backlight
Alarms 1 & 2
Clock
Indoor Temp.
Outdoor Temp.
Date
Trend
Indicator(s)
Remote Sensor/
Channel Indicator
DWS-320-IB_ENG\SP 10/12/04 11:38 AM Page 9
