HoMedics Duo Pro, Instruction Manual

Page: 6 / 16

Body­area Comfortable­energy­Level
4.­the­device­sets­itself­on­the­lowest­energy­level.­deliver­the­first­pulse,­on­energy­level­1,­by­pressing­the
pulse­button.­you­will­see­a­bright­flash,­hear­a­popping­noise­and­you­may­feel­a­mild­stinging­or/and­heat
sensation.­
5.­ remove­the­applicator­from­the­skin­and­place­it­on­the­next­spot­of­the­test­area.
6.­Use­the­power­button­to­increase­the­energy­level­by­1.­the­energy­level­lights­will­light­up­blue­(or­white
for­levels­4­and­5)­according­to­the­selected­energy­level.­deliver­the­second­pulse,­on­energy­level­2,­by
pressing­the­trigger­button.
7.­ Only if you feel comfortable repeat­steps­5­to­6­until­you­have­reached­the­maximum­energy­Level­of­5.
Stop­the­test­once­you­do­not­feel­comfortable,­increasing­the­energy­level­increases­the­risk­of­adverse
effects.­
If you see adverse effects such as severe redness or blistering stop the test immediately.
8. Wait­48­hours­and­examine­the­tested­area.­If­the­skin­in­the­test­area­seems­normal­(no­response­or­mild
redness)­you­can­proceed­with­a­full­treatment­in­the­highest­comfortable­energy­level­you­tested.
If­you­see­extreme­redness,­swelling­or­blistering,­even­in­the­low­energy­level­settings­do­not­do­the­full
treatment­in­that­area.
Note: do­not­treat­full­areas­in­energy­levels­you­have­not­tested­before.
do­not­treat­the­tested­area­for­at­least­1­week­after­the­spot­test­is­done.­Use­the­table­below­to­make­a­note
of­the­energy­level­that­suits­you­for­different­areas­you­wish­to­treat.
6
GB
IB-IPLHH160GB-
0315-01_Layout 1 28/04/2015 09:31 Page 6