4
5
How to Enjoy Sleep Therapy:
Tap on the Sleep Therapy touch button and scroll through any one of our 8 Water or Nature
relaxation tones. Choose the tone you wish to relax to as you fall asleep. Once you are asleep,
your Relaxation tone will gently transition to a White Noise tone to keep you in the deepest
sleep imaginable- all night long.
NOTE:
Sleep Therapy is designed to run all night, until you wake fully refreshed in the morning.
Therefore, you cannot use Sleep Therapy with the Timer Mode.
3. Once you select the White Noise, Water, Nature or Sleep Therapy tone that is suits your needs,
you can adjust the sound by pressing the TONE button (Fig 1) up and down. Press and hold
the “+” symbol to remove bass and achieve a higher pitch. Press and hold the “-“ symbol to
add bass and achieve a lower pitch.
4. Finally, to adjust the VOLUME, press and hold the “+” or “-“ symbols on the VOL button (Fig 1).
Your Deep Sleep unit is now set. When you wake in the morning and power off the unit- don’t
fret. You will not have to reset your choices. Your Deep Sleep is programmed to remember your
settings when you power the unit back on. If you choose to try a different sleep setting, just repeat
steps 1-4.
Using the Dimmer
1. Press the Dimmer button (Fig. 3) to scroll through the LCD Dimmer settings (Hi, Med, Low, Off).
Using the Auto-Timer
1. When the power is on and you are listening to a white noise, water or nature tone, you may set a
timer so the unit will automatically turn off.
2. Toggle through the TIMER button (Fig. 3) until the corresponding LED illuminates next to
the time of your choice, 30, 60 or 90 minutes. The unit will automatically shut off after the
selected time.
NOTE:
Do not select the TIMER button if you wish to listen to the sounds continuously.
Maintenance
To Store
You may leave the unit on display, or you can store it in its box in a cool, dry place.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner to clean. Modifications not
authorized by the manufacturer may void users authority to operate this device.
FCC Disclaimer
NOTE:
This device complies with Part 15 of the FCC guidelines. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user in encouraged to try to correct the interference by one or more of
the following measure:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
1.
Timer - 30, 60, 90 Minutes
2.
Power - ON/OFF
3.
Dimmer - Hi, Med, Low, Off
1
2
3
Fig. 3
