14
G
B
HOW TO OPERATE
For Foot – SOLE
1. Place your bare feet onto the Circulator (do not wear socks).
2. Press the on/off button, the LCD screen will light up in Orange. And the
program show AUTO and both Band shown in 00, which is in standby
mode (see Fig. 1).
3. Gently increase intensity setting by pushing the button of “SOLE +”. Or
decrease intensity setting by pushing the button of “SOLE -”. The
intensity level is adjustable between 0 and 99. The LCD display will show
the selected level (see Fig. 2).
4. You can adjust the auto off timer by pressing the “Time –“ or “Time +”.
Timer range from 1-60 minutes. The timer will begin to count down from
the time setting you select (see Fig. 3). To terminate the massage period,
user can turn off the unit anytime by pressing the on/off Button once.
5. If you are satisfied with the current massage programme, you can lock
the current massage programme by pressing the Auto/Mode key. The
rest of the massage time will then only run the selected massage
programme (see Fig. 4).
IMPORTANT INFORMATION:
a. The aim is not to get up to level ‘99’.
b Chose an intensity level that is comfortable for you! This level may
very from day to day.
c. Remember to drink plenty of fluid – if you are dehyrdated, this will
reduce the effectiveness of the device
Fig. 1
Fig. 2
Fig. 3
Fig. 4
IB-CB200GB-1213-02_Layout 1 16/12/2013 12:02 Page 14