HoMedics CIRCULATION PRO Instruction Manual Download Page 17

16

E

CLEANING   

Electrode Gel pad

• When not in use, store the Electrode Gel pads on the plastic pad protectors provided at room temperature.
• Keep the Electrode Gel pads clean and dust free in a dry location, keep away from oily or sticky areas. The

life of the electrodes varies depending on skin conditions, storage, amount of use, type of stimulation, and
stimulation site. Usage may be extended by carefully cleaning the gel surface with water.  Do not spill
liquid on the wire. 

• Single patient use only.  
• Do not apply to broken skin. Should a skin rash occur , discontinue use and contact your physician
• Do not use tissue, cloth etc. to wipe the electrode surface.
• Do not use finger nail, brush etc. to damage the electrode surface.
• Do not frequently clean the pads, and don’t use the detergent or hot water to clean the electrode gel pads

Main Device

• Switch off the power, remove the adapter and the electrode gel pad from the unit for storage in correct

way. 

• Always keep clean the main device, by using a soft cloth to clean the surface of the unit. 
• To clean the foot pedals, use a soft, damp, soapy cloth but make sure to squeeze the cloth dry and clean

the foot pedal area.

• If the device is very dirty, use a soft, damp soapy cloth but make sure to squeeze the cloth dry to clean the

unit. 

• Do not spill liquid on the device 
• Do not immerse the device in water 
• Do not clean with chemicals
• Store in a dry, dust free location in a temperature between 10ºC to 40ºC and 30% to 90% relative humidity. 

Safety Precautions

• Do not open the device or repair it yourself. This will invalidate your warranty and may cause serious harm. 
• If the device malfunctions, disconnect it from the power source and contact your selling agent as soon as

possible. 

• Use only the accessories supplied by the manufacturer. 
• Use the device only for its intended purpose. 
• Do not expose the device to extreme heat. 
• Do not overload the electrical outlet. 
• Do not stand on the machine. Use it when sitting down only. 
• Do not spill liquid on the device or its accessories
The warranty is void if the product has been altered, misused or abused. HoMedics will not take any
responsibility. 

13-0095 CB200-CA_IM_E_vE.qxd:Layout 1  7/2/13  2:05 PM  Page 16

Summary of Contents for CIRCULATION PRO

























Reviews: