HoMedics BA-C200, Instruction Manual

Page: 5 / 48

5
G
B
PRODUCT FEATURES:
INSTRUCTIONS FOR USE:
• This cushion is for use in the bath and is fully water submersible.
• Place the cushion behind your back and adjust headrest to desired position.
• Use included suction cups by attaching the hooks to the loops on the back of the cushion.
• Affix suction cups to bath to keep cushion in place during bath.
• Massager may be activated by pressing the On/Off button located on the corner of the cushion.
To turn off the unit, simply press the On/Off switch once again.
MODE SELECTION:
• Use the mode button to select a massage program
• Default program is steady vibration
• First press mode button is wave-like vibration
• Second press mode button is pulsating vibration
• Third press returns to steady vibration
INSERTING THE BATTERIES
. Open zipper located along back side of cushion.
2. Remove battery case and twist to align arrow on top of case with arrow on bottom of case.
Pull two halves apart. Follow the correct polarity as shown in the battery compartment.
. Place four ”AA” size batteries into battery compartment, replace two halves with arrows aligned and push
together. Twist to secure.
4. Place the battery case back in pillow and close zipper.
NOTE: Incorrect installation of batteries may cause damage to the unit.
On/Off Button
Mode Selection Button
Ultra Plush Fabric
for soft comfort
Convenient battery operation
(4 “AA” batteries included)
Adjustable Headrest
Relaxing Massage
Removable and
Washable Cover
HG8450_IB-BA-C200.qxd:Layout 1 23/7/10 12:42 Page 5