4
5
HOW TO USE:
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the Pre-Filter inside the box and remove the protective plastic bag.
1. Open the back grill by pulling on the tabs on either side of the top of the grill cover. Fig. 1
2. Open the cover outward until the tabs at the bottom of the grill cover easily slide away from the unit. Fig. 2
3. The top of the carbon pre-filter has 2 slots for installation. Hang the carbon pre-filter on the top tabs and
secure under the bottom tabs. Fig. 3
4. The True HEPA filter will be resting inside the unit. Make sure the filter is firmly seated inside the unit with the
Air Flow arrows pointing toward the inside of the air purifier. Fig 4
5. Place the tabs at the bottom of the grill cover into the base of the unit. Gently push the grill cover back into
place until you hear a click sound indicating that the grill is firmly latched. Fig. 5
Plug the power cord into a standard 240V power outlet.
HOW TO USE (CONTINUED):
1. ON/OFF AND FAN SPEED SETTINGS
• To turn the air purifier on, press the ON/OFF button. When the air purifier is on, the ON/OFF button and fan
speed indicator will illuminate and the air purifier will start to operate.
• To turn the air purifier display lights off, press the ON/OFF button a second time.
• To turn the air purifier off, Press the ON/OFF button a third time.
• This air purifier has 3 fan speed settings: LOW (1), MEDIUM (2), and HIGH (3). The higher the fan speed setting,
the faster the air will be purified. To select or change fan speed, press the FAN SPEED button until desired
speed is reached.
2. TIMER
Select timed operation of your air purifier with the TIMER Control. Timed operation up to 12 hours can be
selected. The air purifier will turn off automatically after the selected timer interval has elapsed. Use the timer
setting whenever you wish to maintain air quality over a given time period (up to 12 hours), but do not wish to
leave your air purifier running continuously.
To select timed operation, press the TIMER Control until desired timer setting is reached. Timer interval
selected is indicated by the illuminated time interval to the right of the timer control. To deselect timed operation,
cycle through all timer settings until no timer interval is illuminated.
4
5
Operating Instructions
Before Turning the Unit On
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the pre-filter inside the box and remove the protective plastic bag.
• Install the Pre-filter and make sure the True HEPA filter is firmly in place.
Fig. 1
Fig. 2
Fig. 3
1. Open the back grill by pulling on
the tabs on either side of the top
of the grill cover. Fig. 1
2. Open the cover outward until
the tabs at the bottom of the grill
cover easily slide away from the
unit. Fig. 2
3. The top of the carbon pre-filter
has 2 slots for installation. Hang
the carbon pre-filter on the
top tabs and secure under the
bottom tabs. Fig. 3
2hr
4hr
8hr
12hr
Replace
Pre-Filter
Indicator
Button
Replace HEPA Filter
Indicator Button
Timer Control
Timer Indicators
Fan Speed Selection
(Low, Medium, High)
Power ON/OFF
Control Panel
Main Features of the HoMedics True HEPA Air Purifier
Control Panel
Main Unit
Pre-Filter
HEPA Filter
Grill Cover
4
5
Operating Instructions
Before Turning the Unit On
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the pre-filter inside the box and remove the protective plastic bag.
• Install the Pre-filter and make sure the True HEPA filter is firmly in place.
Fig. 1
Fig. 2
Fig. 3
1. Open the back grill by pulling on
the tabs on either side of the top
of the grill cover. Fig. 1
2. Open the cover outward until
the tabs at the bottom of the grill
cover easily slide away from the
unit. Fig. 2
3. The top of the carbon pre-filter
has 2 slots for installation. Hang
the carbon pre-filter on the
top tabs and secure under the
bottom tabs. Fig. 3
2hr
4hr
8hr
12hr
Replace
Pre-Filter
Indicator
Button
Replace HEPA Filter
Indicator Button
Timer Control
Timer Indicators
Fan Speed Selection
(Low, Medium, High)
Power ON/OFF
Control Panel
Main Features of the HoMedics True HEPA Air Purifier
Control Panel
Main Unit
Pre-Filter
HEPA Filter
Grill Cover
4
5
Operating Instructions
Before Turning the Unit On
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the pre-filter inside the box and remove the protective plastic bag.
• Install the Pre-filter and make sure the True HEPA filter is firmly in place.
Fig. 1
Fig. 2
Fig. 3
1. Open the back grill by pulling on
the tabs on either side of the top
of the grill cover. Fig. 1
2. Open the cover outward until
the tabs at the bottom of the grill
cover easily slide away from the
unit. Fig. 2
3. The top of the carbon pre-filter
has 2 slots for installation. Hang
the carbon pre-filter on the
top tabs and secure under the
bottom tabs. Fig. 3
2hr
4hr
8hr
12hr
Replace
Pre-Filter
Indicator
Button
Replace HEPA Filter
Indicator Button
Timer Control
Timer Indicators
Fan Speed Selection
(Low, Medium, High)
Power ON/OFF
Control Panel
Main Features of the HoMedics True HEPA Air Purifier
Control Panel
Main Unit
Pre-Filter
HEPA Filter
Grill Cover
6
7
Fig. 5
Fig. 4
5. Place the tabs at the bottom of the grill
cover into the base of the unit. Gently
push the grill cover back into place
until you hear a click sound indicating
that the grill is firmly latched. Fig. 5
Plug the power cord into a standard
AC outlet.
automatically after the selected timer interval has elapsed. Use the timer setting
whenever you wish to maintain air quality over a given time period (up to 12
hours), but do not wish to leave your air purifier running continuously.
To select timed operation, press the TIMER Control until desired timer setting
is reached. Timer interval selected is indicated by the illuminated time interval to
the right of the timer control. To deselect timed operation, cycle through all timer
settings until no timer interval is illuminated.
Replace Pre-Filter Indicator Button
The Replace Pre-Filter Indicator illuminates when to replace the Odor Reducing Pre-
Filter based on the air purifier’s hours of use.
Replace True HEPA Filter Indicator Button
The Replace True HEPA Filter Indicator illuminates when to replace the True HEPA
filter based on the air purifier’s hours of use.
Filter Replacement
It is recommended to check the filters on occasion if used to remove stronger odors
or under heavy pollen conditions.
Replacing the Odor Reducing Pre-Filter
For optimal performance, replace every 3-months under normal usage
conditions. Once the Odor Reducing Pre-Filter has been replaced, press and
hold the Replace Pre-Filter Button for 3-seconds to reset the indicator.
To purchase genuine HoMedics replacement Odor Reducing Pre-Filters, model
AP-25CRF, go back to your retailer where you purchased your air purifier, or visit
www.homedics.com.
Replacing the True HEPA Filter
For optimal performance, replace every 12-months under normal usage
conditions. Once the True HEPA Filter has been replaced, press and hold the
Replace HEPA Filter Button for 3-seconds to reset the indicator.
To purchase genuine HoMedics replacement True HEPA Filters, model
AF-20FL, go back to your retailer where you purchased your air purifier, or visit
www.homedics.com.
1. On/Off and Fan Speed Settings
• To turn the air purifier on, press the ON/OFF
button. When the air purifier is
on, the ON/OFF button and fan speed indicator will illuminate and the air purifier
will start to operate.
• To turn the air purifier display lights off, press the ON/OFF
button a second
time.
• To turn the air purifier off, Press the ON/OFF
button a third time.
• This air purifier has 3 fan speed settings: LOW (1), MEDIUM (2), and HIGH (3).
The higher the fan speed setting, the faster the air will be purified. To select or
change fan speed, press the FAN SPEED button until desired speed is
reached.
2. Timer
Select timed operation of your air purifier with the TIMER Control. Timed
operation up to 12 hours can be selected. The air purifier will turn off
4. The True HEPA filter will be resting
inside the unit. Make sure the filter is
firmly seated inside the unit with the Air
Flow arrows pointing toward the inside
of the air purifier. Fig 4
6
7
Fig. 5
Fig. 4
5. Place the tabs at the bottom of the grill
cover into the base of the unit. Gently
push the grill cover back into place
until you hear a click sound indicating
that the grill is firmly latched. Fig. 5
Plug the power cord into a standard
AC outlet.
automatically after the selected timer interval has elapsed. Use the timer setting
whenever you wish to maintain air quality over a given time period (up to 12
hours), but do not wish to leave your air purifier running continuously.
To select timed operation, press the TIMER Control until desired timer setting
is reached. Timer interval selected is indicated by the illuminated time interval to
the right of the timer control. To deselect timed operation, cycle through all timer
settings until no timer interval is illuminated.
Replace Pre-Filter Indicator Button
The Replace Pre-Filter Indicator illuminates when to replace the Odor Reducing Pre-
Filter based on the air purifier’s hours of use.
Replace True HEPA Filter Indicator Button
The Replace True HEPA Filter Indicator illuminates when to replace the True HEPA
filter based on the air purifier’s hours of use.
Filter Replacement
It is recommended to check the filters on occasion if used to remove stronger odors
or under heavy pollen conditions.
Replacing the Odor Reducing Pre-Filter
For optimal performance, replace every 3-months under normal usage
conditions. Once the Odor Reducing Pre-Filter has been replaced, press and
hold the Replace Pre-Filter Button for 3-seconds to reset the indicator.
To purchase genuine HoMedics replacement Odor Reducing Pre-Filters, model
AP-25CRF, go back to your retailer where you purchased your air purifier, or visit
www.homedics.com.
Replacing the True HEPA Filter
For optimal performance, replace every 12-months under normal usage
conditions. Once the True HEPA Filter has been replaced, press and hold the
Replace HEPA Filter Button for 3-seconds to reset the indicator.
To purchase genuine HoMedics replacement True HEPA Filters, model
AF-20FL, go back to your retailer where you purchased your air purifier, or visit
www.homedics.com.
1. On/Off and Fan Speed Settings
• To turn the air purifier on, press the ON/OFF
button. When the air purifier is
on, the ON/OFF button and fan speed indicator will illuminate and the air purifier
will start to operate.
• To turn the air purifier display lights off, press the ON/OFF
button a second
time.
• To turn the air purifier off, Press the ON/OFF
button a third time.
• This air purifier has 3 fan speed settings: LOW (1), MEDIUM (2), and HIGH (3).
The higher the fan speed setting, the faster the air will be purified. To select or
change fan speed, press the FAN SPEED button until desired speed is
reached.
2. Timer
Select timed operation of your air purifier with the TIMER Control. Timed
operation up to 12 hours can be selected. The air purifier will turn off
4. The True HEPA filter will be resting
inside the unit. Make sure the filter is
firmly seated inside the unit with the Air
Flow arrows pointing toward the inside
of the air purifier. Fig 4
REPLACE PRE-FILTER INDICATOR BUTTON
The Replace Pre-Filter Indicator illuminates when to replace the Odour Reducing Pre-Filter based on the air
purifier’s hours of use.
REPLACE TRUE HEPA FILTER INDICATOR BUTTON
The Replace True HEPA Filter Indicator illuminates when to replace the True HEPA filter based on the air purifier’s
hours of use.
FILTER REPLACEMENT
It is recommended to check the filters on occasion if used to remove stronger odors or under heavy pollen
conditions.
REPLACING THE ODOUR REDUCING PRE-FILTER
For optimal performance, replace every 3-months under normal usage conditions. Once the Odour Reducing
Pre-Filter has been replaced, press and hold the Replace Pre-Filter Button for 3-seconds to reset the indicator.
To purchase genuine HoMedics replacement Odour Reducing Pre-Filters, contact Homedics Australia on
(03) 8756 6500 or visit www.homedics.com.au.
REPLACING THE TRUE HEPA FILTER
For optimal performance, replace every 12-months under normal usage conditions. Once the True HEPA Filter has
been replaced, press and hold the Replace HEPA Filter Button for 3-seconds to reset the indicator.
To purchase genuine HoMedics replacement True HEPA Filters, contact Homedics Australia on (03) 8756 6500 or
www.homedics.com.au.
iHOM4960 AP25AU manual v3 FA.indd 4-5
15/09/2016 9:30 AM
