6
DOWNROD MOUNTING
Pin
Downrod
Clip
Downrod
Canopy
Canopy Cover
Coupling Cover
Step 1.
Remove the pin
and clip from the downrod.
Loosen the two pre-in-
stalled bolts in the yoke at
the top of the fan motor
assembly.
Step 2.
Carefully place the
canopy, canopy cover, and
coupling cover onto the
downrod. Feed the supply
wires from the fan motor
through the downrod.
Step 3.
Install the downrod
onto the yoke, aligning the
holes, inserting the pin
through the downrod, and
reinstalling the clip.
Retighten the bolts.
Step 4.
Place the downrod’s mount into the bracket on
the outlet box. Rotate the entire assembly until the tab
has dropped into the mount’s slot and locked into place.
The motor assembly should no longer rotate if seated
properly.
Failure to reattach the hitch pin and/or properly seat
the downrod can cause the fan to fall from the ceiling
during operation.
DO NOT
use the fan before ensuring it is properly
secured and the motor can no longer rotate.
Bolts
Pin
Clip
Downrod
