HOMEDEPOT L-GZ636PST-B Assembly Instruction Manual Download Page 2

SAFETY INFORMATION 

Please read and understand this entire manual before attempting to assemble, operate or 

install the product. 

 

WARNING 

  This product is intended for outdoor use only and should be placed on flat, horizontal 

ground. 

  Ensure enough clearance around the product. 

  Anchor the gazebo to the ground with stakes for added safety. Stakes are provided to 

secure the gazebo in the ground. If you wish to secure the gazebo to a concrete and 

wood surfaces, use anchors suited for these surfaces (anchors not included). 

  Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do not have 

enough anchorage in these types of soil. 

  Before assembling the product, find level ground no less than 6 ft. away from any 

structures or obstructions, such as fences, garages, houses, overhanging branches, 

laundry lines, or electrical wires. 

 

CAUTION 

  Any assembly or maintenance of the product must be carried out by adults only. 

  Six or more people are recommended to safely assemble and/or move the product. 

  Some parts may contain sharp edges. Wear protective gloves if necessary. 

  Check all nuts and bolts periodically for tightness. When required, tighten them again. 

  Do not hang any weights on the roof frame. 

  Always keep children under close supervision when they are using or are around this 

product. 

  Never leave children unattended. 

 

PREPARATION 

Before beginning assembly of product, make sure all parts are present. Compare parts with 

package contents list and hardware contents list. If any part is missing or damaged, do not 

attempt to assemble the product. 

 

Estimated Assembly Time: 90 minutes. 

 

Tools Required for Assembly: Wrench (included) and Phillips Screwdriver (not included). 

 
 
 
 
 
 
 
 
 

Summary of Contents for L-GZ636PST-B












Reviews: