HOMEDEPOT L-GZ636PST-B Assembly Instruction Manual Download Page 11

  Always disassemble the gazebo completely. A partially disassembled gazebo is not 

stable enough to resist wind and bad weather, and therefore can be damaged and/or 

cause damage. 

  Do not use bleach, acid or other abrasive cleaners on the roof or frame parts. 

  Steel components of garden accessories and furniture are treated with rust-inhibiting 

paint. However, due to the nature of steel, surface oxidation (rusting) will occur if this 

protective coating is scratched. This is a natural process. To minimize this condition, it 

is recommended care be taken when assembling and handling the product, in order to 

prevent the paint from being scratched. 

  Surface rust can be removed easily using a very light application of common cooking 

oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the 

oxidation may start dripping onto the assembly surface, which may cause damaging 

stains that may be difficult to remove. 

  If the product will not be used for a long period (e.g. winter time), it should be stored in 

a clean, dry environment. 

  Keep the original packaging to store the gazebo. 

 
LIMITED WARRANTY: 

 

This limited warranty is extended to the original purchaser and applies to defects in             

materials and workmanship of your item provided the item is maintained with care and   

used only for personal, residential purposes. The item is warranted to be free from defects   

in material or workmanship for a period of 

one (1) year.

 If any defect is found, please call   

our customer service department at 1-866-578-6569 for help. The manufacturer will not   

cover transportation or delivery costs, or compensate the individual or any outside party   

for assembling or disassembling the product. This warranty gives you specific legal rights,   

and you may also have other rights which vary from state to state. 

 

EXCLUSIONS: 

Items used for commercial, contract, or other non-residential purposes, or   

items damaged due to acts of nature, vandalism, misuse, or improper assembly are not   

covered. Corrosion or rusting of hardware is not covered.    Proof of purchase (dated   

register receipt) is required for warranty claims. Warranty is to the original purchaser and   

is non-transferable. Any replacement of warranted items will be in the original style and   

color, or a similar style and color if the original is unavailable or has been discontinued. As   

some states do not allow exclusions or limitations on an implied warranty, the above   

exclusions and limitations may not apply. This warranty gives you specific rights, and you   

may also have other rights, which vary from state to state. 

 

Important: Please do not return this product to the store. 

For technical assistance on 

assembly or replacement parts. Please call Sunjoy Industries at 1-866-578-6569 from 

8:00 am EST to 8:00 pm PST or fax the replacement part form which is in the box to 

1-740-283-3549 or Email [email protected] for assistance. 

 
 

Made in China 

2016-4 

Summary of Contents for L-GZ636PST-B












Reviews: