Homecare 37602 Assembly Instructions Manual Download Page 6

 

Instructions for Use 
 

The Pedicraft Homecare Crib Bed is intended for use during a patient’s sleeping 
hours to prevent falls and wandering while others in the house are sleeping.  It is not 
intended to be used for extended periods when the patient is awake and 
unsupervised. 
 
Enclosed beds are intended for medically fragile patients with chronic illness such 
as cerebral palsy, brain trauma or other severe disability.  They are not intended to 
restrain a difficult but otherwise healthy child or adult.

 

 

  To lower Side Rail: Turn handle and lift slightly, then lower to desired position. 

 

  To raise Side Rail: Hold side rail tube or top rail and lift to desired position.  Do not use 

handle to raise Side Rail. 

 
CAUTION:  DO NOT LEAVE PATIENT UNATTENDED WHEN SIDE RAIL IS LOWERED. 
 

  If Bed is equipped with Head Elevation feature: Turn crank at the foot of the bed to raise 

and lower the head of the bed.   

 

CAUTION:  DO NOT LEAVE AN ACTIVE PATIENT UNATTENDED WHEN THE HEAD 
OF THE BED IS RAISED. 
 

  If Bed is equipped with Crib Top: Squeeze both knobs and lift rail to open top.  Make 

sure that both latches are secure before releasing the rail. 

 
CAUTION: DO NOT LEAVE PATIENT UNATTENDED WHEN CRIB TOP IS OPEN.

 

 

  Do not substitute the mattress provided with this bed with any other type or size of 

mattress.  Crib mattresses must fit tightly.  The Pedicraft mattress is designed to leave 
gaps smaller than one-half inch between the crib and the mattress as required by the 
Consumer Product Safety Commission. 

 

Summary of Contents for 37602








Reviews: