Caution
• For indoor or outdoor use. Always place the plug into an indoor mains socket or a weatherproof outdoor socket.
• Always unwind the cord before use. Do not connect the product to the power supply whilst the product is still in the packaging.
• This light set is constructed with non-replaceable LED bulbs, DO NOT attempt to replace any of the LED bulbs in the light set.
• This product is intended for occasional decoration only, not to be used by children as a toy and not intended for household illumination.
• It is normal for the transformer to run a little warm, please ensure it's used in a well ventilated area.
• Keep away from sources of heat and naked flames.
• Unplug when not in use.
• Always unplug from the mains supply whilst installing, carrying out maintenance or adjustments.
• The external flexible cable or cord of this light set cannot be replaced; if the cord is damaged, the light set must be destroyed.
• Use only with the supplied transformer.
• When storing away, make sure the area is dry. Avoid any damp, wet and humid areas.
• Please read these instructions carefully. Keep these instructions in a safe place for future reference.
Before you start
1. Study the “Caution” section carefully.
2. Decide on an appropriate location for your product. Make sure that you have plenty of space, a level surface, and a clear dry area for
3. Check the pack and make sure you have all of the parts.
4. Remove all plastic packaging materials and dispose of them safely.
assembly, then locate. Always try to assemble the product as close as possible to the intended location.
Assembly
Step 1
Step 2
Step 3
Assemble the deer head (1)
into the deer body (2).
Fasten the deer head (1) and deer
body (2). Rotate the C-shaped buckle
on the deer head (1) downward, and
press the wire on the neck of the deer
body (2) tightly.
Assembly complete.
If you position outdoors, please
use the stakes (4) provided and
fix them into the ground.
Assembled dimensions
No. Parts list Qty
1
2
3
4
Deer head
Deer body
Transformer
Ground stake
1
1
1
4
Parts list
Rated input: 9V DC Max. 3.6W
Bulb rating: 2.8-3.6V/20mA
Transformer:JT-DC9V3.6W-E3
Product specifications
120cm
75cm
28cm
