14
20
15
18
20
13
19
8
7
9
9
9
9
7
7
7
7
7
7
7
7
7
7
Fig. B
Fig. C
Step 6:
Open the seat assembly (8) and fasten a swing
arm tube (7) and a swing arm (6) to the seat
back by using bolt (14), washers (18), and
plastic nut (20).
Repeat
the same procedure for
both sides. Fasten another swing arm tube (7)
to the swing arm (6) at the front bend by using
bolt
(15), washers (18), and plastic nut (20).
Repeat
the same procedure for both sides.
Fasten the other end of the swing arm (6) to the
front of the seat assembly (8) by using bolt (13),
washers (17), and plastic nut (19).
Repeat
the
same procedure for both sides. See Fig. B.
Step 7:
Hook the suspension springs (9) into the
top of both swing arm tubes (7).
Repeat
the
same procedure for both sides. See Fig. C.
6
6
17
17
Warning:
Make sure that both ends of the suspension
springs (9) go completely through the holes
on the top cross beam w/adjustable teeth (1)
and the swing arm tubes (7).
Step 8:
Hang the opposite ends of the suspension
springs (9) into the holes located on the angled
braces of the top cross beam w/adjustable
teeth (1).
Repeat
the same procedure for both
sides. See Fig. D.
Fig. D
9
9
1
18
18
18
5
