Customer Helpline
03448012949
14
Operation (continued)
Operating Instructions
sure the batteries are fitted in the laser guide before carrying out precision cutting. To fit the
batteries, remove the battery storage cover(c), insert 2 x 1.5v AAA batteries, then replace cover.
NOTE:
Ensure correct battery polarity.
To use the laser guide, simply slide the laser on/off switch(b) at the “I” position, the laser guide
then projects a visible red line on the workpiece surface, make your cut along the red line.
Switch off the laser after cutting.
NOTE:
The sawdust may “block” the laser beam, clean the laser generator periodically.
WARNING: Never stare directly into the laser beam and never point the beam
at anybody.
DANGER: Laser radiation. Avoid direct eye contact with light source.
