26
9. 1 Multi Satellite Search
To perform a Multi Satellite Channel
Search, please first choose the
Satellites you wish to perform your
search on. You will notice, after
choosing the first satellite, a window
will open. Please configure your
antenna setting in this Sub-Menu:
Choose between:
DiSEqC 1.0 (up to 4 ports), DiSEqC
1.1 (up to 16 ports), DiSEqC 2.0
(Motor) and USALS (Motor) and
allocate the according port where
applicable.
After performing the settings for the first satellite, please confirm using the OK
key. Then choose the next Satellite you wish to set up and repeat as for the first
satellite. In the same way set up all desired satellites that you would like to
perform a search on (and assuming your satellite antenna has the according
features).
To begin the Search for Channels on
the set Satellites press the RED
SCAN key and specify whether you
would like to search for All Channels,
Free-To-Air
Channels,
Scrambled
Channels or Only TV Channels.
If you would like to perform a Network
Search, please change the according
Option to “On” – the receiver will then
check the up-to-date channel
information as searching services, however, this Search Option will increase the
Search time. Begin the Search by pressing RED.
Summary of Contents for HDTV-Sat-Irdeto-Receiver
Page 1: ...HDTV Sat Irdeto Receiver...
Page 2: ......
