INSTALLATION
13
EN
G
LIS
H
!
Make sure that all the packing materials are removed from the inside of the door.
!
WARNING: Check the oven for any damage, such as misaligned or bent door, damaged door
seals and sealing surface, broken or loose door hinges and latches and dents inside the
cavity or on the door. If there is any damage, do not operate the oven and contact qualified
service personnel.
!
This microwave oven must be placed on a flat, stable surface to hold its weight and the
heaviest food likely to be cooked in the oven.
!
Do not place the oven where heat, moisture, or high humidity are generated, or near
combustible materials.
!
For correct operation, the oven must have sufficient airflow. Allow 20 cm of space above the
oven, 10 cm at back and 5 cm at both sides. Do not cover or block any openings on the
appliance. Do not remove feet.
!
Do not operate the oven without glass tray, roller support, and shaft in their proper
positions.
!
Make sure that the power supply cord is undamaged and does not run under the oven or over
any hot or sharp surface.
!
The socket must be readily accessible so that it can be easily unplugged in an
emergency.
!
Do not use the oven outdoors.
WARNING-THIS APPLIANCE MUST BE EARTHED.
1. The plug socket should be within easy reachof the power cord
2.
This oven requires 1.2 KVA for its input. Consultation with service engineer issuggested when
installing the oven.
Caution
: This oven is protected internally by ac 250V, 8 Amp Fuse.