7
Important Safety Instructions
•
To prevent fire hazard in case of oil build-up, the turbine impellers and other easily-soiled parts must
be cleaned at least twice a month.
• Your safety and the safety of others is very important. We have provided many important safety
messages in this manual and on your appliance. Always read and obey all safety messages.
•
Installation and electrical wiring must be done by qualified professionals according to all applicable
codes and standards, including fire-rated construction. Do not attempt to install this appliance
yourself. Damage or Injury may result.
• Before you connect the appliance, ensure that the voltage indicated on the appliance corresponds to
the local power voltage.
• Connect the power and switch on the motors and lighting system to check the operation.
•
Due to the size and weight of this range hood, arrange at least two people to install this product,
otherwise may cause risk of fire, electric shock or personal injury.
• The product may have very sharp edges, if necessary, wear protective gloves to remove any parts
during installing, cleaning or servicing.
• Ensure any nearby electrical services are off and stay off until the completion of installation to
reduce the risk of electrical shock, short-circuit, electrical spark which may cause injury or damage.
•
This product is for general ventilating use only. Do not use it to exhaust hazardous or explosive
materials or vapors.
•
To reduce the risk of fire and to disperse air properly, make sure to vent air outside. Sufficient
household air flow is required for the proper combustion of fuel-burning heating equipment and the
exhaustion of their gases.
• Ducted fans must always be vented to the outdoors.
• Do not vent exhaust into spaces between walls, crawl spaces, ceiling, attics or garages.
•
To avoid the possibility of a grease fire, any old duct work should be cleaned or replaced if necessary.
Check all joints on duct work to ensure proper connection. All joints should be properly taped.
• Use only metal ductwork and this unit must be grounded.
• Before maintaining or cleaning the unit, switch power off at service panel. Lock service panel to
prevent power from being switched on accidentally.
• When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden
utilities.
• All electrical wiring must be properly installed, insulated and grounded.
• Use this unit only in the manner intended by the manufacturer. If you have questions, contact the
vendor.
• Do not touch the bottom side of the range hood after usage until it gets cooled.
• Plug in and test this product and all its functions before scheduling an installer.