Home HME030340N, Manual, Page: 8 / 15

14 15
Operating Instructions
TOP RAIL ASSEMBLY (ONLY USED FOR 8K)
The top rail must be assembled prior to installing the air
conditioner in the window.
Tools Needed: Phillips Screw Driver
Top Rail Hardware QTY
3/8”
Screw
4
Top
Rail 1
Attaching the Top Rail to the Air Conditioner
1. Remove the air conditioner from the box and place on a
hard flat surface.
2. Remove top rail from the bottom of the packaging
material as shown in FIG. A.
3. Align the hole in the top rail with those in the top of the
unit as shown in FIG. B.
4. Secure the top rail to the unit with the 3/8” screws as
shown in FIG. C.
CAUTION:
When handling the unit, be careful to avoid cuts from the sharp
metal edges and aluminum fins on the front and rear coils.
MOUNTING HARDWARE
3/4” Screws
1/2” Screws
Lock Frame
Sash Lock
4
3
2
1
TOOLS NEEDED:
• Phillips Screw Driver
• Drill (If pilot holes are needed)
CAUTION:
When handling the unit, be careful to avoid cuts from the sharp
metal edges and aluminum fins on the front and rear coils.
NOTE:
For safety reasons, all 4 screws must
be used to attach the top rail.
INSTALLATION & ASSEMBLY INSTRUCTIONS (USED FOR 10K/12K)
Some assembly is required for your new air conditioner. Please read and follow these instructions carefully
1. This air conditioner is designed to be installed in a standard double-hung window with a window
width between 26” and 36”.
2. The air conditioner can be installed without the accordion panels to fit in a narrow window opening.
See the window dimensions.
3. The Lower Sash (the lower part of the window that moves up and down) must allow for 16” of
vertical clearance when open.
4. All supporting parts must be secured to firm wood, masonry, or metal.
5. The electrical outlet must be within reach of the power cord.
Operating Instructions
NOTE:
Save the product
packaging and
installation
instructions for
future reference.
Store the air
conditioner in
the product box
when not in use
for an extended
period of time