7
SPECIFICATIONS
Input voltage
220–240 V ~
Frequency
50–60 Hz
Power consumption
1 500 – 1 800 W
Maximum volume
1,5 l
Dimensions
230 × 170 × 223 mm
Weight
0.75 kg
USE OF THE APPLIANCE
Before first use
Remove the kettle and the base from the packaging. Before disposing of the packaging,
be sure to remove all components. Check that the kettle and the base are not damaged.
Fill the kettle with clean water up to the maximum mark. Boil the water and empty the
contents of the kettle. Repeat the procedure twice.
Using
1. Unwind the required length of power cord and push it into the groove at the bottom of the
base.
2.
Place the stand on a flat, dry and clean surface at a sufficient distance from the power outlet.
3.
To be able to fill the kettle with water, you need to open the lid by pressing the open lid
button. You can also fill the kettle at the tap. Pour clean and cold water into the kettle and
close the lid. Make sure that the water level reaches at least the MIN (minimum amount of
water) line, but never fill the kettle above the MAX (maximum amount of water) line.
Warning:
Never fill the kettle with water above the MAX line to prevent hot water from splashing
out during cooking or handling.
4. Make sure that the lid is properly closed and place the kettle on the base.
Warning:
Under no circumstances fill the kettle with water while it is located on the base.
5. Plug the power cord into an electrical outlet.
6.
Set the switch to the "I" (on) position. The power light comes on and the kettle starts to heat
water.
Warning:
Do not start the kettle when empty. Even if the kettle is equipped with a safety fuse that
automatically shuts it off if it is started empty or with a small amount of water, the kettle
may be damaged.
Summary of Contents for HM-EK-A150SS
Page 1: ...User Manual HM EK A150SS Electric Kettle...
Page 2: ...2...
