(888) 782-5618
Figure 1
- Twist the Plastic Lens (Part B) and remove it from the Solar Panel Unit (Part A).
- Slide the switch which is on the bottom of the Solar Panel Unit (Part A ) to "ON"
position.
- Replace the Plastic lens accordingly.
Figure 2
- Insert the Tube (Part C) to Plastic Lens (Part B), and then the Groud Spike (Part D).
- Take the light to the area where it can receive a full 8 hours of sunlight to allow the
rechargeable battery to reach maximum capacity.
Note: Lights with amorphous panels may have a protective film over the solar
panel. This must be removed prior to use.
1.
Use a damp cloth to clean the solar panel
2.
To avoid any damage to this light, please do not use any chemical or abrasive cleaner
This product contains (1)1.2V AAA 100mAH Ni-MH rechargeable battery. When the
battery expires, it must be recycled or disposed of properly. Please contact your
local waste disposal authority for correct procedure. Do not put battery into fire.
- Twist the Plastic Lens (Part B) and remove it from the Solar Panel Unit (Part A).
- Use a screwdriver to screw out 2 screws on the bottom of the Solar Panel Unit
(Part A) and open the battery chamber cover.
- Replace the old battery with a new battery making sure the polarity is correct.
- Reposition the battery cover tightly.
HOW TO OPERATE AND INSTALL
HOW IT WORKS
CLEANING AND MAINTENANCE
Battery replacement
RECHARGEABLE BATTERY
Solar Path Light (12-Pack)
Model No. ELJ6842V
Solar panel collects sunlight to charge
the battery (included) during the day
Automatically turns on at dusk for up to 8
hours of nighttime illumination
s e c u r i t y
www.homezonesecurity.com
