4
5
Grounding Instructions
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for the
electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment grounding conductor and
a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug
provided with the product - if it will not fit the outlet, you may
temporarily use an adapter (such as the one shown in Figure
B) until you have a proper outlet (such as the one shown in
Figure C) installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in Figure A.
A temporary adapter that looks like the adapter illustrated in Figure B
may be used to connect this plug to a 2-pole receptacle as shown in
Figure D if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet Figure
C can be installed by a qualified electrician. The tab for grounding
screw Figure B extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal
screw. See Figures D and E.
Perfect Steam Features
• Safe for use on all types of fabrics
• Quick heat-up feature emits steam in 45 seconds
• Convenient integrated garment hanger
• Telescoping design for compact storage
• 5 foot flexible hose with Safe Touch
®
hose cover for safe and
comfortable handling
• Easy-fill water tank provides 45 minutes of continuous steam
• Rolling casters for excellent mobility
• Low water auto shut-off for safe use
Assembly Instructions
1. Carefully remove all contents from packaging and inspect the
product to make sure all components have been received
(Fig. 10).
2. Insert pole into top of unit. Match the grooves on the pole with the
notches in the pole connector and push down. Securely tighten
the nut on the pole over the connector by turning it clockwise
(Fig 1).
3. To attach the hanger attachment, align tabs in hanger attachment
with grooves on pole and push down (Fig. 2).
4. Fully extend the telescopic pole. To do so, open the 3 clips on the
pole and pull the pole upwards (Fig. 2). When fully extended close
the clips. Make sure that the pole is securely locked into place
and cannot be pushed downward.
5. Attach the fabric brush to the nozzle by setting into place (Fig. 3).
6. Attach handle & hose assembly to unit. Line up the nut on the
hose with the screw on the hose connector. Turn nut clockwise
until it is securely tightened on the hose connector, (Fig 4). It
should be tightly screwed into place. Then you may hang the
steamer handle onto the hanger attachment (Fig. 3).
NOTE:
Do not hang the hose on the hanger attachment until after
it has been connected to the base to prevent the hose from falling
on you.
7. Attach the crease tool (Fig. 5) onto the nozzle tab and gently push
into place.
NOTE:
Do not use the crease clamp and the fabric brush at the
same time
Pole
Turn
Turn
Nozzle
Tab
Crease
Clamp
Clips
Hanger
Attachment
Grounding Pin
Adapter
Tab for
Grounding
Screw
Figure A
Figure B
Figure D
Figure C
Figure E
Grounded
Outlet
Metal Screw
Fabric
Brush
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
IB-PS-251.indd 4-5
4/29/15 3:07 PM
