EN
17
9. If you are pulsing, repeat the process. If you are gliding, simply continue.
Continue to pulse or glide until you have treated the area fully.
E
Stop use immediately, if your skin blisters or burns.
10. After treatment
When you have finished your treatment session:
1. Turn the device off by giving the
control button
an extended press.
Remember the last energy level setting you used, because it will not be
restored when you turn the device on again.
2. Remove the
adapter
from the electrical outlet.
11. Maintenance
It is important to clean your Silk'n BellaFlash Pro device after each treatment. To
clean the device:
L
Unplug the device.
L
To clean the device including the
treatment surface,
wipe with
a clean, dry cloth. Never use acetone or other abrasive fluids,
because they will damage your device.
L
After cleaning, we recommend you store the device in its
original box.
E
Never immerse your Silk'n BellaFlash Pro or any of its parts
in water.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 17
20/03/2017 11:52:23
