6
Assembly Instructions
Step 5
Step 6
D
D
D
D
8
8
6
6
3
7
7
C
C
A
A
Turn over.
Insert the 4 Metal cams
into the 4 holes on
the panels so that
they are flush.
Note:
Longer
leg of the cross
on the Metal
Cams must face towards
end of panels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
7
8
D
D
Screw 4 Metal dowels
into the threaded holes
in the Divider as
shown.
6
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Divider
onto the edges of Rear
and Bottom panels,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A
