D
11
Assembly Instructions
Step 15
Step 16
E
B
12
D
D
D
K
L
Insert the 8 Metal cams
into the 8 holes on
the side panels, dividers
and rear rail so that they
are flush.
Note:
Longer
leg of the cross
on the Metal
Cams must face towards
metal dowels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
D
D
Screw 8 Shelf holders
onto the pre-drilled holes
in divider and Left side
frame using 12mm
Screws , make sure
the screws of the shelf
holders face downwards
as shown.
E
B
L
Push the top Glass shelf
into the Shelf
holders and secure
with the screws by
turning clockwise as
shown.
12
E
Repeat this step to
assemble the other glass
shelf.
Peel off the cover of the
Foot pads , attach
to the bottom edges of
side panels and divider
as shown.
Turn the unit upright.
K
D
