20
NOTE:
The DATE and TIME will stamp to captured images and
first frame of video.
NOTE:
Settings and images stored on internal memory may be
lost in the event of a power failure. Always ensure you reset
your Security Light after a loss of power.
5.
Setting the AE frequency to 60Hz or 50Hz
Please make sure the Camera switch is at the CAM position
a.
By adjusting your Security Light to reflect the AC power
frequency, you will eliminate any flicker effect on captured
images.
1.
For the UK this must be set to 50Hz.
2.
For the US this must be set to 60Hz.
b.
Press the SET button once, the display will show ESC.
c.
Press the UP or DN button repeatedly until the display
shows AE.
d.
Press the SET button again to go to AE setting. The display
will show 60Hz or 50Hz.
e.
Press the UP or DN button to change the AE setting to
60Hz or 50Hz, then press the SET button to confirm. The
display will change back to show AE.
f.
Press the UP or DN button repeatedly until display shows
ESC, then press the SET button to exit.
6.
Setting the resolution
a.
Slide the Resolution switch to HI or LO. HI resolution is
12M image and LO resolution is 5M image. The resolution
setting is also for Video recording.
