15
Your Security Light is equipped with 32MB built-in memory.
Please note that the data stored on internal memory may be
lost in the event of a power failure. We therefore recommend
the use the enclosed SD card. The SD card reader slot is
capable of accepting up to 16GB SD card (sold separately).
With no memory card inserted into the slot, the camera will use
the built-in 32MB memory. If a SD card is inserted into the slot
then the camera will bypass the built-in memory and write to
the SD card. It is not recommended that a card is inserted or
removed during operation as this can cause malfunction. The
control panel display will show the number of images on the
built-in memory and will change to show the number on a SD
card if one is inserted.
Mounting the Security Light
Mount the Security Light to a solid surface more than 1/2” or
12.7 mm thick in a secure location overseeing the area to
monitor. We suggest you mount the camera at 2 meters above
the ground with the camera pointing at a downward angle 15
degrees. Be sure to avoid mounting the camera facing east or
west as the rising and setting of the sun may produce false
triggers and overexposed images. Ensure the front of your
Security Light is clear of any branches and other debris so that
your camera view or PIR sensor is not obscured.
