Home Electronics SM-13002R, Instruction Manual

Page: 11 / 100

11
ENGLISH
CAUTION:
Do not carry out this procedure on heat and steam sensitive floors.
4. Slowly pass over the surface to be cleaned. The absorbent mop cloth picks up the dirt
loosened by the steam. Apply steam liberally. Keep a towel handy and wipe away any excess
water that may accumulate.
5. When the mop stops emitting steam, simply turn OFF and unplug the appliance, refill the
water tank and continue cleaning.
For Best Results:
1. Sweep or vacuum floor prior to using the mop.
2. Da To avoid puddling of water, the Microfiber Cloth must
be clean and dry for use. To replace the cleaning cloth,
proceed as follows: Let the cleaning cloth cool down,
remove cloth from unit, replace with a new microfiber
cloth (Optional Item) and continue use. Select low steam
regulator position.
3. To sanitize an area of your floor, leave the mop at high
steam setting over the steam area for about 10 seconds,
but no longer than 15 second. Always take into account
the structure of the floor and whether is designed for vapor
cleaning.
• Never steam at one spot for too long. This can cause floor surface damage.
• Do not put hands or feet under the steam mop. That part of the appliance is very hot and can
cause burns.
• During use a pulsing noise may be heard indicating that the mop is producing steam. This
noise is normal.
• There may be some minor “spitting” of water mixed with the steam. This is also normal.
• The force and heat of the steam may adversely affect certain materials. Always check the
suitability of using the steam mop on a surface by carrying out a preliminary test on a hidden
area.