8
Fireplace Installation
INSTALLATION
IMPORTANT:Do not connect the appliance until it is properly fixed to the wall and the instruction have
been read fully. Ensure the minimum distances are observed.
Drilling the Holes
2
Put the bracket aside and Drill four holes in the wall
with a depth of 1 3/8inch (35mm) using a 7/25 inch.
(7 mm) drill bit.
Insert the Wall Anchors (EE) into the holes by using
a hammer.
3
Securing the Top Wall Bracket
Secure the Top Wall Bracket (A) to the wall by fastening
provided Long Screws (CC) into the wall anchors.
1
Choosing a Wall Location
Choose a wall location to attach the Top Wall Bracket (A).
Position the Top Wall Bracket (A) in the desired location.
Use a level to align the bracket and mark the four holes
with a pencil.
Min
HW9315SMQR
15.4inch (39cm)
Min
HW9315HSMQR
21.4inch (54.2cm)
A
Wall
A
EE
CC
The fire is designed to be permanently fixed to a wall
at a suitable height, the wall bracket must be fitted
horizontally and the cable routed to the bottom right
of the fire. A height of 23.6inch (60cm) from the floor
to the bottom of the wall fire is recommended for
optimum viewing of the fuel bed.
361 mm(HW9315SMQR)
（
To Appliance bottom
）
513 mm(HW9315HSMQR)
A
Summary of Contents for HW9315HSMQR
Page 17: ...17 Warranty ...
