Home Depot HW9315HSMQR, Owner'S Manual

Page: 7 / 19

7
Fireplace Installation
BEFORE YOUR FIRST USE:
1. Remove your appliance from the packaging.
2. Install your appliance in accordance with the installation & safety instructions.
3. Your appliance is now ready for normal use.
Dispose of the packaging in a responsible manner.
WARNING: This product must be installed correctly, failure to do so may result in injury,
electric shock to the user or damage to your product and your Property.
1. 2mm pilot drill bit & 8mm drill bit (the 8mm drill bit may need to be a masonry bit)
2. Philips screw driver
3. Power drill
Phillips Screwdriver
Tools Required for Assembly (not included):
Level Drill
Hammer
Drill Bits
2mm
8mm
4. Level vial
5. Hammer
HANDLING
Before continuing any further with the installation of this fire please read the following:
•
•
When lifting always keep your back straight. Bend your legs and not your back.
Two people should be sufficient to lift the fire.
•
Avoid twisting at the waist. It is better to reposition your feet.
•
Avoid upper body / top heavy bending.Always bend from the knees rather than the waist. Do not lean
•
Always grip with the palm of your hand. Do not use the tips of fingers for support.
•
Always keep the product as close to the body as possible to prevent unnecessary
and undue strain on the body.
•
Use gloves to provide additional grip.
•
Always use assistance if required.
UNPACKING THE PRODUCT
The unit is supplied in a single package carton. Carefully unpack the product using the following procedure:
•
Ensure that the product is in the correct position with the carton wording legible.
•
Remove the straps and sleeve.
•
Carefully lift the product out of the box.
•
Remove the protective packaging and bag from the product.
•
Ensure that the product is in the correct.
forward or sideways whilst handling the fire.