Assembly
Attaching the legs
Place the stand ring (G) on a soft, flat surface and align
the bolt holes on the legs (I) with the holes on the stand
ring (G).
Loosely secure the legs (I) to the stand ring (G) with bolts
(AA).
Place the leg connector ring (H) between the legs (I) and
secure loosely from the inside of the stand leg connector
ring (H) with bolts (AA).
Once all of the bolts (AA) are in place and the stand
assembly is aligned properly, tighten all bolts (AA) with the
Hex wrench (BB).
Attaching the leg connector ring
AA
I
G
I
H
AA
C
F
E
D
I
A
B
C
I
Assembling the bowl, log grate, and
fire screen
Carefully turn the stand assembly to the upright position
and place the bowl (F) into the stand.
Place the small log grate (E) into the bottom ridge of the
bowl (F) and place the large log grate (D) into the upper
ridge of the bowl (D).
Position the fire screen (C) onto the bowl (F) so that is
resting on the inside ledge of the bowl. Make sure all
components are square and level.
Carefully attache the spark arrester cap (A) to the chimney
(B) by pushing down into the top of chimney (B).
Carefully place chimney (B) onto the fire screen (C).
Assembling the Chimney and spark
arrester cap
Please contact 1-877-527-0313 for further assistance.
