TEMPLATE
CUT ALONG DOTTED LINE
2.25”
4.00”
FLEXIBLE OPENING
CABLE WALL PLATE
TEMPLATE
CUT ALONG DOTTED LINE
2.25”
4.00”
FLEXIBLE OPENING
CABLE WALL PLATE
IMPORTANT SAFETY NOTICE:
● It is against National Electrical Code (NEC) to run a power or extension cord behind a wall.
● Do not run or pull your TV cord or any other electrical cords inside the wall.
● The Flexible Opening Cable Wall Plates are designed for use with low voltage and data cables
ONLY.
CAUTION:
● Never install low voltage wiring during lightning storms.
● Never install low voltage wiring in wet locations unless the wire is specifically designed for wet locations.
● Never touch un-insulated low voltage wires or terminals unless the wire has been disconnected at its source.
● Do not use this product near water. For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool.
● Use caution when installing low voltage cables.
● Save these Instructions.
CE Tech’s products shall be installed and used only as indicated in CE Tech’s product instruction sheets.
For assistance, call 877-527-0313.
The Flexible Opening Cable Wall Plate is Patent Protected by U.S. Patent #7495171.
HDMI cables are CL3 rated to UL standards for use in in-wall installation applications.
Page 2 of 2
9200 Rev. 2
