7
Assembly (Rocking Chairs)
3
Place the chair seat (E) upside down. Align the rocking plates (1) of the chair base to the U-bar (2) of the chair seat (E).
You may need to loosen the pre-installed bolts on U-bar (3) to line up.
Clamp the U-bar (2) and the rocking plates (1) with washer plates (O).
Secure the U-bar (2), the rocking plates (1) and the washer plates (O) with washers (H), lock washers (I) and nuts (Q)
from above the washer plates (O), and also with bolts (P) from below the washer plates (O) with spanners (R).
Fully tighten all the bolts and nuts once all bolts and nuts are in place.
□
4
Attaching bolt caps Placing cushions
□
□
□
Attaching the chair seat to the chair base
Fully tighten all bolts and nuts and cover them
.
(see diagram below)
Do the same for pre-installed bolts and nuts.
Place cushions (#1 and #2) on the chair.Use hook and loop
straps or fabric loops to secure cushions onto the frame.
Repeat steps 1 through 5 for the other chair.
S
T
U
V
#2
#1
□
1
2
3
E
Q
H
O
R
I
R
p
□
□
5
with the nut and bolt caps (S,U,V).
Please contact 1-800-986-3460 for further assistance.
WWW.HOMEDEPOT.COM/HOMEDECORATORS
