Operation (continued)
17
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
NOTE:
The learning frequency function and self calibration test will continue to retain the last set frequency and calibration set even when
the AC power is shut off. If the frequency is changed, the self calibration test will occur again.
Lock position:
The DC motor has a built-in safety against obstruction during operation. The motor lock’s and disconnect’s power after 30 seconds if
interruption occurs. Please remove obstacles before re-setting.
Over 80W protection:
When the receiver detects motor power consumption which is greater than 80W, the receiver’s power will stop and operation will be
immediately discontinued. Turn the receiver power on after 5 seconds.
“D” and “ON” dip switch:
The “D” selection is the light dimmable selection and is to be used with all bulbs except for CFL bulbs. The “ON” selection is For CFL
bulbs.
NOTE:
The fan reverse buttons must be pressed while the fan is running.
REVERSE SWITCH OPERATING INSTRUCTIONS
Speed settings for warm or cool weather depend on factors such as the room size, ceiling height, number of fans.
Summer weather - (Counterclockwise Direction) A downward air
flow creates a cooling effect. This allows you to set your air
conditioner on a warmer setting without affecting your comfort.
Winter weather - (Clockwise Direction) An upward air flow moves
warm air off the ceiling. This allows you to set your heating unit
on a cooler setting without affecting your comfort.
INSTALLING THE REMOTE CONTROL HOLDER
Attach the remote control holder (N) with the two remote
control holder mounting screws (TT).
Replace the remote control holder cover (UU) into the remote
control holder (N).
UU
N
TT
Tools Required:
Phillips
screwdriver
