Assembly — Hanging the Fan (continued)
7
Making the electrical connections
11
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
AA
Neutral
Hot
Black
Ground
conductor
White
Black
Green
White
Green
Outlet Box
A
D
If you feel you do not have enough electrical wiring knowledge
or experience, have your fan installed by a licensed
electrician.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts (AA) with your fan. Secure the
plastic wire nuts (AA) with electrical tape. Make sure there are
no loose strands or connections.
Make wire connections as follows, using the wire nuts (AA).
From Fan To Outlet Box
Black ------------------------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
Green Wires* ---------------- Green or Bare Wire (Ground)
* There are two green grounding leads: one from the mounting
bracket (A) and one from the hanger ball/downrod assembly (D).
Turn the wire nut connections upward, spreading them
apart so the green (ground) and white wires will be on one
side of the outlet box and the black wire will be on the other
side. Carefully tuck the connections up into the outlet box.
WARNING:
Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts (except for the ground wire).
WARNING:
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
CAUTION:
To reduce the risk of electric shock, this fan
must be installed with an isolating wall control/switch.
Tools Required:
Phillips
screwdriver
Ladder
Electrical
Tape
NOTE:
If there is a 2nd hot (red wire) in the outlet box. Cap
the wire off from the fan. You will not need this wire.
