8
This fan is pre-assembled the rear guard, blade and front guard in factory before
shipping for your easy installation, checking all screws are tighten and securely in
place, following the below procedures if you are intended to disassemble the fan
for cleaning: (Fig. 13)
1. Loose the screws on rear guard to disassemble the front guard from rear guard.
2. Remove the blade cover from the blade by turning the blade cover counter-
clockwise.
3. Remove the blade from the rear guard by turning the blades counter-clockwise.
4. Remove the rear guard from the motor head by loosing the screws from the
motor head.
Disassembling Your Fan
Figure 13
Motor Head
Front Guard
Screws
Rear Guard
Screws
Rear Guard
Blade Cover
Blade
Front Guard
