11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
Mounting the fan-motor assembly
(standard mount)
7
WARNING:
When using the standard ball/downrod
mounting, the tab in the ring at the bottom of the
mounting bracket must rest in the groove of the
hanger ball. Failure to properly seat the tab in the
groove could cause damage to the wiring.
NOTE:
The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
□
Align the locking slots of the canopy (C) with the two screws (FF)
and alignment post (OO) in the mounting bracket (A).
□
Push up the canopy (C) and turn it clockwise until the alignment
post (OO) engages to the round hole and the screws (FF) engage
to the key slots.
□
Firmly tighten the two mounting screws (FF).
□
Align the oval shape on the canopy (C) with canopy bottom cover
(JJ), Push up the canopy bottom cover (JJ) until the screw (FF)
heads engage to the slots on the canopy bottom cover (JJ) so that
the magnetic canopy bottom cover (JJ) can be attached to the
bottom of the canopy (C) properly.
NOTE:
For better performance with the WIFI system, the
WIFI antenna must be mounted to the ceiling outside of
the fan’s ceiling canopy.
C
A
B
D
JJ
E
OO
I
FF
View after installation
WiFi antenna mount
outside of the canopy
Assembly - Attaching the Fan Blades
Attaching the blades to the
blade arms on motor assembly
1
□
Attach a blade (G) to the fan motor assembly (E) by inserting
the blade (G) into slots in the side of the fan motor assembly
(E) and aligning the three screws holes in the blade with the
holes in the center flywheel and secure with screws (AA). Use
the hex key (EE) to completely tighten the blade screw (AA).
□
Make sure all the screws are firmly tightened.
□
Repeat these steps for the remaining blades.
AA
EE
