12
Installing the light kit pan
1
□
Remove one screw (GG) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other
two screws.
□
Push the light kit pan (H) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (H) clockwise.
□
Re-install the screw (GG) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
Assembly - Attaching the Fan Blades
Attaching the fan blades to the
blade brackets
1
□
Attach a blade (G) to blade bracket (F) by inserting the screws
(AA) into the holes in the blade (G) and through the blade
bracket (F).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
Assembly - Attaching the Light Kit
NOTE:
Your fan blades are reversible. Select the blade
side finish which best accentuates your decor.
Fastening the blade assemblies to
the motor
2
□
Fasten the blade/blade bracket assembly to the fan motor
assembly (E) by inserting the alignment posts into the slot on
the bottom of the motor and tightening the pre-installed blade
bracket screws (EE).
□
Repeat this steps for the remaining blades.
AA
G
F
EE
E
H
E
GG
