8
Assembly - Hanging the Fan (continued)
Completing the fan assembly
Making the electrical connection
□
Remove two of the four screws (located diagonally
from each other) (PP) from the top of the mounting
plate (A) and loosen the other two screws (PP).
□
Align the two key slots in the top of the motor
housing (C) with the two loose screws (PP) on the
mounting plate (A). Push the motor housing (C) up
and turn it clockwise to lock in the mounting plate
(A). Tighten the two screws.
□
Install the two screws that were removed at the
beginning of this step into the remaining two holes
and tighten the four screws firmly.
4
3
Outlet box
in the ceiling
EE
Green or bare wire
Green
White
Black
White
Black & Blue
B
C
A
PP
IMPORTANT:
Use the plastic wire connectors (AA) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
WARNING:
Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
□
Connect the fan motor green wires to the household green
or bare wire using a wire connecting nut (AA).
□
Connect the fan motor white wire to the household white
wire using a wire connecting nut (AA).
□
Connect the fan motor black and blue wires to the
household black wire using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (AA) upward and push the
wiring into the outlet box (EE).
WARNING:
Remove the rubber motor stops on the bottom of the
fan before installing the blades or testing the motor.
