background image

 

 

Table of Contents 

 

 

 

Table of Contents .......................................................... 2

 

Safety Information ......................................................... 2

 

Warranty ......................................................................... 2

 

Pre-Assembly ................................................................ 2

 

Planning Assembly ..................................................... 2

 

Tools required ............................................................ 2

 

Hardware Included ..................................................... 3

 

Package Contents ...................................................... 4

 

Assembly ....................................................................... 5

 

Care and Maintenance ................................................ 18

 

 

Safety Information 

 

 
Please read and understand these instructions before 
assembling and using this console. Save these 
instructions for future reference. 

MAXIMUM RECOMMENDED WEIGHT 
LOADS 

 

WARNING: 

This unit is not intended for use with CRT 

TVs.  Use  only  with  flat  panel  TVs  and  audio/video 
equipment  meeting  recommended  size  and  weight 
limits. Never use with larger/heavier than recommended 
flat  panel  TVs  or  equipment.  To  avoid  instability,  place 
flat panel  TV in the centre of the unit;  the  base  of  the 
television  must  be  able  to  rest  on  the  supporting 
surface  of  the  unit  without  over-hanging  the  edges. 
Improperly positioned flat panel TVs, or flat panel TVs or 
other  equipment  that  exceed  recommended  size  and 
weight  limits  could  fall  off  or  break  the  unit,  causing 
possible serious injury.

 

 

 

 

 

Warranty 

 

 
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or 
materials, or fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.  

This warranty gives you specific rights and you may also have other rights which vary from state to state. 

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators. 

Pre-Assembly 

 

 

PLANNING ASSEMBLY 

Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not 
assemble this product and contact the Customer Service Team at 1-800-986-3460. 

TOOLS REQUIRED 

 

 

Phillips 
screwdriver 
(not provided) 

 

 
 

 

 

 

 

Maximum load 6.8 kg / 15 

lb

 

MAXIMUM LOAD 50 LB (22.7 kg)

 

Maximum load 22.6 kg / 50 lb

 

MAXIMUM LOAD 50 LB (22.7 kg)

 

Place TV behind the 
stopper 

 

Fits up to most 127 cm / 50 in. flat panel TVs 
Maximum load 61.2 kg / 135 lb 

Summary of Contents for 301353160




















Reviews: