12
Assembly (continued)
15
Installing the metal plate
□ Flip the assembled unit around at its front edges. Secure the middle crossbars (N) to both lower front panels (J)
by attaching four metal plates (KK) at the joints, using two short wood screws (EE) in each, as shown.
16
Attaching the back panel
□ Pick up the back panel (B) and align the drilled holes against the upper long edge with the pilot holes on the back
stretcher of the top panel (A). Attach the back panel (B) in place using the provided washer head screws (FF).
KK
EE
J
J
N
N
FF
A
H
B
D
