background image

 20
 

Operating Instructions

Control Panel

Remote Control

To use the remote control, first remove the 
plastic tab by gently pulling it out of remote 
control.

Controls and Display 

The control panel will display the heater setting when the unit power is turned ON. Whichever control icon you press will display the 
current setting of the corresponding function. Press the control icon again to adjust the setting. Following adjustment of any setting(s), the 
unit will resume to display the heater setting after 5 seconds. 

Power Function 

 

When the unit is plugged-in but not in use, F or C will illuminate to indicate that it is in stand-by mode.  

 

Press the POWER ICON to turn the main power to the unit ON or OFF. 

 

When the unit is powered ON, the control panel will display the heater setting to indicate the unit has power. 

 

Functions stored in memory will resume at the last setting.

 

When the unit is powered OFF, the fan will continue to blow for a 40 second cool-down cycle prior to shutting down (a 
countdown will be displayed). 

Flame Brightness Function 

 

Press the FLAME BRIGHTNESS ICON to display the current flame brightness setting. 

 

Press the FLAME BRIGHTNESS ICON again to scroll down through the flame brightness settings: 5, 4, 3, 2, 1, OF (OFF). 

Flame Speed Function 

 

Press the FLAME SPEED ICON to display the current flame speed setting.

 

Press the FLAME SPEED ICON again to scroll down through the flame speed settings: 5, 4, 3, 2, 1. 

Heater Function 

 

Press the HEATER ICON to display the current heater setting. 

 

Press the HEATER ICON again to scroll down through the heater settings.  

NOTE:

 Long-hold the icon to quickly scroll through settings.

 

Set the heater to “HI” (High) to have the heater run continually. 

 

Set the heater to “OF” (OFF) to use the flame functions without heat. 

 

This heater has a thermostat sensor to control the ambient temperature in the surrounding area of the fireplace. The heater 
will cycle ON and OFF to maintain the selected temperature. The thermostat setting range is 90ºF (43°C) to 65°F (18°C).

Summary of Contents for 1007512418


























Reviews: