background image

 2
 

Table of Contents

Table of Contents  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Planning Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tools Required  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Package Contents   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Care and Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Safety Information

Please read and understand this entire manual before 
attempting to assemble, operate or install the product. 
This equipment has been tested and found to comply with 
the limits for Class B digital devices, pursuant to Part 15 
of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. The equipment generates, uses and 
can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on. The user is 
encouraged to try and correct the interference by one or more 
of the following measures: 

 

Reorient or relocate the receiving antenna

 

Increase the separation between the equipment and the 
receiver

 

Connect the equipment into an outlet on a circuit different 
from that to which the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for 
help. 

This device complies with Part 15 of the FCC rules. Operation is 
subject to the following two conditions: 

1.  This device may not cause harmful interference, and 
2.  This device must accept any interference received, including 

interference that may cause undesired operation. 

Modifications not approved by the party responsible for 
compliance could void user’s authority to operate the 
equipment. 
This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should 
always be followed to reduce the risk of fire, electric shock and 
injury to persons, including the following:  

DANGER

 

To reduce the risk of electrical shock, ensure the product is stable, 
and avoid tipping. 

 

Read all instructions before installing or using this heater. 

 

If the information in this manual is not followed exactly, an electric 
shock or fire may result causing property damage, personal injury 
or loss of life. 

 

ALWAYS

 unplug this appliance/furnishing from the electrical outlet 

before cleaning or servicing. 

 

WARNING

 

This appliance is hot when in use. To avoid burns, 

DO NOT

 let 

bare skin touch hot surfaces. Keep combustible material, such as 
furniture, pillows, bedding, papers, clothes and curtains at least 3 
feet from this appliance and keep them away from the sides and 
rear. 

 

Extreme caution is necessary when any heater is used by or near 
children or individuals with disabilities and whenever the fireplace 
is left operating and unattended. 

 

DO NOT

 run cord under carpeting. 

DO NOT

 cover cord with throw 

rugs, runners, or similar coverings. 

 

DO NOT

 route cord under furniture or appliances. Arrange cord 

away from traffic areas and where it will not be tripped over. 

 

DO NOT

 insert or allow foreign objects to enter any ventilation or 

exhaust opening as this may cause an electric shock or fire, or 
damage the appliance. 

 

This appliance has hot and arcing or sparking parts inside. 

DO NOT

 

use it in areas where gasoline, paint or flammable vapors or liquids 
are used or stored. This fireplace should not be used as a drying 
rack for clothing. Christmas stockings or decorations should not be 
hung in the area of it. 

Summary of Contents for 1007512418


























Reviews: