10
Mounting the fan-motor assembly
(standard mount)
8
Assembly - Hanging the Fan (continued)
□
Align the locking slots of the canopy (C) with the two screws (GG)
and alignment post (KK) in the mounting bracket (A).
□
Push up the canopy (C) and turn clockwise until the alignment
post (KK) engages to the round hole and the screws (GG) engage
to the key slots.
□
Firmly tighten the two mounting screws (GG).
□
Align the oval shape on the canopy (C) with the canopy bottom
cover (FF). Push up the canopy bottom cover (FF) until the screw
(GG) heads engage to the slots on the canopy bottom cover (FF)
so that the magnetic canopy bottom cover (FF) can be attached to
the bottom of the canopy (C) properly.
WARNING:
When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
Attaching the fan blades
10
□
Attach the blade assembly to the motor assembly (E) by
aligning the screw holes on the blade arm (F) with the screw
holes on the bottom of the fan motor assembly (E).
□
Insert the screws (BB) into the holes on the blade arm (F) and
through the holes on the bottom of the fan motor assembly (E),
and tighten each screw to secure the blade assembly.
□
Repeat these steps for the remaining blade assemblies.
GG
A
C
B
FF
E
KK
Installing the blades to the
blade brackets
9
□
Attach a blade (G) to the blade arm (F) by aligning the holes
on the blades (G) and blade arms (F), inserting the screws (CC)
into the holes and through the blade (G) and blade arm (F).
□
Tighten each screw to secure the blade (G).
□
Repeat this step for each blade (G) and blade arm (F).
CC
G
F
Assembly - Attaching the Fan Blades
BB
E
F
NOTE:
The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
