Assembly — Installing the Light Kit
11
Attaching the light kit to
the switch housing
□
Remove the three light kit mounting screws (KK) from the
switch housing (J) and keep these screws.
□
While holding the light kit (K) under your fan motor
assembly (G), locate two single white and blue wires in
the switch housing labeled "FOR LIGHT". Make the
polarized plug connections (BBB):
- White to white
- Blue to black
□
Carefully push all wires back into the switch housing (J).
Install the light kit (K) onto the switch housing (J) with the
three light kit mounting screws (KK) provided. Be sure to
tighten all screws.
12
16
Installing the decorative cage
□
Raise the decorative cage (L) up against the light kit (K)
and secure by tightening with the four decorative cage
screws (LL).
□
Install the 2 x 7.5W LED bulbs (MM) (included).
J
K
KK
BBB
G
NOTE:
The pull chain guide (CCC) on the decorative cage (L)
must align with the switch (DDD) on the switch housing (J) for
the proper fit.
L
LL
G
J
CCC
K
MM
DDD
