Care and Maintenance
CAUTION:
Turn OFF all power to the circuit at the main circuit breaker or fuse box. DO NOT rely on the wall
switch alone to turn off power.
□
This lantern provides years of maintenance-free service.
□
Do not touch the bulb or open the f
i
ixture housing.
□
To clean, turn OFF all power to the circuit and clean surfaces with a mild, non-abrasive cleaner.
□
Bulb Replacement: use Max.60W type A bulb or Max.4W type A LED bulb.
7
WWW.HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Troubleshooting
Problem
Probable Cause
Solution
The light does not illuminate.
There may be a poor connection between
the light and the supply wires inside the
junction box.
Check the wire connections.
There is no power going to the light.
Check that the switch is on and there is
power to the light fixture.
Operating Instructions
□
The sensor in the fixture is designed to detect light and prevent the fixture from turning on when
it senses daylight. At dusk,the light will turn on throughout the night until dawn. At dawn, the light
will turn off throughout the day until dusk.
If the fixture is installed in a shaded or covered area where there is little direct sunlight, the
light may come on during the day.
□
Sensor
The light comes on during the day.
The fixture may be installed in a relatively
dark location.
Relocate the fixture.
There is dust on the sensor.
Periodically clean the surface of the sensor
with a mild, non-abrasive cleaner.
The sensor detects lights or sunlight nearby.
Avoid light directed at the sensor at night.
