INSTALLATION & ASSEMBLY (cont.):
5.
Place the Wall Plate (#10) over the Outlet Box (#4) and onto the Fixture
M
ti
S
(#6)
d dj t th Fi t
M
ti
S
(#6)
til
Mounting Screws (#6), and adjust the Fixture Mounting Screws (#6) until
they protrude out from the Wall Plate (#10) 1/4". Remove the Wall Plate
(#10) and secure the position of the Fixture Mounting Screws (#6) by
tightening the Hex Nuts (#9) against the Mounting Bracket (#7). Place the
Wall Plate (#10) back onto the Fixture Mounting Screws (#6), and secure it
into place using the Lock Nuts (#3) provided
into place using the Lock Nuts (#3) provided.
6.
After installing the fixture, caulk the upper 2/3s of the Wall Plate (#10) to
mounting surface.
Leave the bottom 1/3 un-caulked for drainage of any
water that might leak drainage of any water that might leak into the
enclosure. The manufacturer recommends a non-drying exterior caulking
material. A good example is a clear silicone rubber sealant for exterior use.
7.
Insert the Inner Glass Shade (#19) into the Cage (#17) and into the Cage
Cup (#20). Twist the Inner Glass Shade (#19) clockwise until it locks into
place, as shown
(Fig. 2)
.
19. Inner Glass Shade
20. Cage Cup
17. Cage
Page 6
Fig. 2
