Home Decor Basswood Installation Manuallines Download Page 1

Page: 1 / 4

2612 West Townley Ave, Suite 5, Phoenix, AZ 85021

Phone: 602-995-9659 Fax: 602-995-7157

HII-1

Revision 110420

Made in America

2” and 2 1/2” Basswood and Fauxwood

Installation Guidelines

You will need:

Pencil, tape measure, drill, screwdriver, pliers, and appropriate fasteners

Choose the Correct Fastener

1 1/2” #8 hex head wood screws (included). Alternative fasteners should be used for metal,

brick, tile, concrete or other material installations

(not included in

HOME DECOR

hardware

package).

Prepare Brackets

Use the following number of center support installation brackets based on the blind width:

Up to 63”

63” - 84”

Greater than 84”

Open the front of the bracket by pressing on the

bottom of the bracket to release the locking tab,

while lifting the front gate.

Summary of Contents for Basswood

Page 1: ...he Correct Fastener 1 1 2 8 hex head wood screws included Alternative fasteners should be used for metal brick tile concrete or other material installations not included in HOME DECOR hardware package...

Page 2: ...and equally spaced Use a level to ensure each section of the headrail is level For Inside Mount Installations Position the box brackets at each end of the headrail Depending on the installation locat...

Page 3: ...ht back until it is snug in the brackets If the headrail can slide from side to side in the box brackets you can use a flat head screwdriver to bend out the tabs on the end of the unit until it is snu...

Page 4: ...ck the cord Then slowly release the cord until the shade reaches the desired location Move the cord past the outer edge of the shade and let go to lock the cord Guide the blind down with your hand To...