OPERATION PANEL
The controls featured in this manual are representative of many models available. Your model may
look slightly different.
1. ON/OFF button
Turns on/off the air conditioner.
Note:
If the air conditioner is off and then is turned on while set at the cool or dry mode, it will take
approximately 3 minutes for the compressor to start and for cooling or dry operation to begin.
DISPLAY and OPERATION PANEL
6
6
2. OPERATION MODE button
COOL( ) DRY( ) FAN( ) COOL( )
…
Use to select the operation mode in the order of:
COOL( )
DRY
( )
FAN( )
ELECTRIC HEAT
( ) COOL( )
…
Cool only type:
Electric heat type:
MODE
Dry mode
indicator
Fan mode
indicator
Cool mode
indicator
5
Display of setting TEMP, AUTO-ON/OFF time and failure code.
Fan speed indicator
indicator
(
Electric heat type
)
Electric heat
mode
Water full indicator
2
4
3
1
3. TIMER SET button (Timer range: 0.5-24 hours)
Notice:
After 10 seconds of AUTO-OFF timer being set, room actual temperature
will resume to be displayed.
1). When the unit is on, press the button once to check the AUTO-OFF time that will be displayed for
10 seconds. If no AUTO-OFF time is set, “ 0 ” will be shown on the display and you can press the
button to activate the AUTO-OFF timer function. Before 10 hours, every press of button increases
the AUTO-OFF time by 0.5 hour, after 10 hours, every press of button increases the AUTO-OFF
time by 1 hour. You can refer to the following:
0.5 1 1.5 2 2.5 3 3.5 9.5 10 11 24 0 0.5
…
…
…
MODE