Home Comfort AM-07C53RD1, Owner'S Manual, Page: 10 / 12

FUNCTION SPECIFICATIONS
1.
AUTO mode
In this mode, the air conditioner can automatically adjust the room temperature to decide the most suitable
temperature. At the start of operation, the air conditioner will automatically select the operation mode
according to the room temperature. The following table shows the conditions which are set at start up.
Mode
RT-2
Cool
Dry
RT
24
Room Temperature (RT)
RT 26
RT 23
26 RT 23
Initial Setting Temperature
Fan
COOL mode
Press FAN SPEED button to change the fan speed.
Press TEMPERATURE ADJUSTMENT button to change the set temperature.
2.
When the room temperature is higher than the set temperature, the compressor starts; when the room
temperature is lower than the set temperature, the compressor stops.
DRY mode
4.
In this mode, the air conditioner automatically sets the room temperature.
TEMPERATURE ADJUSTMENT button and FAN SPEED button are not functional.
Dry operation is not available when the room temperature is lower than 13 .
In this mode, the compressor doesn't operate. The unit fan alone operates.
Press FAN SPEED button to change the fan speed.
5.
FAN mode
REMOTE CONTROLLER
AUTO-ON/OFF TIMER OPERATION CANCEL
6.
SLEEP mode
Press of FAN SPEED button can quit SLEEP mode.
At cool mode, after one hour of operation the set temperature will increase by 1
. One hour later, the
set temperature will increase by 1 once more. The unit will then continue operating at 2 above the
set temperature.
9 9
3. The unit will now “ start ” automatically at the specified AUTO-ON time when you see “ ”of “ ”
not flash on the display. Meanwhile, the set temperature will revert back to be displayed. To view
AUTO-ON time, press button .
To cancel AUTO-ON/OFF timer operation, press button twice continuously until “ ”or “ ”
disappears on the remote controller display.
ELECTRIC HEAT mode(only applied to electric heat series)
Press TEMPERATURE ADJUSTMENT button to change the set temperature.
3.
RT-2
24
Initial Setting Temperature
Cool only type
Electric-heat mode
26
Mode
Cool
Dry
Electric-heat
At model mode, after one hour of operation the set temperature will by 1 . One
hour later, the set temperature will by 1 once more. The unit will then continue operating at
2 above the set temperature.
electric heat decrease
decrease
In this mode, the only keeps at LOW. FAN SPEED